AIC-SellSheet

AIC Acrylic Enamel

K1/K2 Series- 5.0 voc/3.5 voc 

 

Mixing-

Non-catalyzed: 4 Mixed Color + up to 1 Exempt Reducer AIR10/AIR20

Catalyzed: 8 Mixed Color +up to 2 Exempt Reducer AIR10/AIR20 +1 Hardener AIH50

 Application-

• Adjust air pressure at the gun to 55-65 psi Conventional Pressure Feed (adjust pot pressure to 8-15 fluid ounce sper minute delivery).
• For Conventional Pressure Feed, apply 2 medium coats at a gun distance of 8-10 inches.  Spray to hiding.
• For HVLP apply 1 wet coat with 50% overlap, applying the second coat in cross-coat method,  Dry film thickness is 2.0-2.5 mils.

Drying Schedule- Dry times are based on the dry film thickness of 2.0-2.5 mils; thicker films will extend drying times.

Air Dry Times @ 75 F and 50% Relative Humidity:

                        Unaccelerated               Accelerated

                                                            (3 oz. AIC440

                                                            per sprayable gal.)

Dust Free              2 hours                        1 hour

Tack Free              2 hours                        3 hours

Tape Free             4 hours                         3 hours

NIB Sand              8 hours                         4 hours

 

Forced Dry Times-

Temperature        Unaccelerated                 Accelerated

                                tape free                         ( 3 oz. AIC440

                                                                        per sprayable gal.)

140 F                    80-120 minuets                    60 minuets

160 F                    60-80 minuets                      45 minuets

180 F                    45-60 minuets                      30 minuets

 

Acrylic Urethane

K3 series- 2.8 Voc/ 3.5 Voc

Mixing-

3 Mixed Color + 1 AIR10/AIR20 + 1 AIH28/AIH35

*to speed cure items, add up tp 3 oz. of AIA 200 Accelerater.

Application-

• Adjust air pressure of the gun to 55-66 psi Conventional Pressure Feed (adjust pot presurre to 8-15 fluid ounces per minute delivery).
• For Conentional Pressure Feed apply two medium coats at a gun distance of 8-10 inches.  Spray to hiding.
• For HVLP apply one full wet coat with 50% overlap, applying the second coat in a cross-coat method.  Dry film thickness is 2.0-2.5 mils.

Drying Schedule- Dry times are based on the dry film thickness of 2.0-2.5 mils; thicker films will extend drying times.

Air Dry Times @ 75 F and 50% Relative Humidity:

                  Temperature        Accelerated             Accelerated

                                            (1 oz. AIA200              (3 oz. AIA200

                                           per sprayable gal.)      per sprayable gal.)

 

Dust Free      1-2 hours             1 hour                        40 minuets

Tack Free      4-5 hours            3 hours                        2 hours

Tape Free     12 hours              4 hours                        3 hours

NIB Sand      12+ hours           5 hours                        4 hours

 

Forced Dry Times

Temperature     Unaccelerated       Tape Free          Tape Free

                           tape free            (1 oz. AIA200        (1 oz. AIA200

                                                     per sprayble gal.)    per sprayable gal.)

140 F                80-120 minuets            60 minuets               30 minuets

160 F                60-80 minuets              45 minuets                20 minuets

180 F                45-60 minuets              30 minuets                20 minuets