Heavy Truck & Bus
Market Overview
Sherwin-Williams Automotive Finishes develops, manufactures, and distributes the highest quality coatings to Tier I and Tier II suppliers for the OEM Heavy Truck & Bus market. Sherwin-Williams is a technology leader in undercoats and interior trim coatings, which offer solutions for a variety of applications, including various rigid plastic substrates through spray and injection molding. Our high performing technologies coupled with our trademark technical service will increase productivity, profitability, and sustainability.
Products
Polane P® Conductive Primer
E67 Series Polane P® Conductive Primer is a low bake, low VOC, two component urethane designed to provide superior adhesion to various rigid plastic substrates. The highly conductive film facilitates electrostatic application of topcoats for improved transfer efficiency.
GLAS CLAD® Black Conductive In-Mold Coating Primer
E67BR1906 is a low viscosity conductive in-mold coating designed to offer better coverage for molders when injecting into Sheet Molding Compound (SMC), Preform, or Bulk Molding Compound (BMC) while still in the mold. A long workable pot life permits the use of one component injection equipment. This technology leaves a conductive surface allowing electrostatic application of subsequent coating while filling mold imperfections and surface porosity.
GENESIS® Interior
The Genesis® Interior product line is an extremely durable 2K solventborne coating for interior trim. It is available in high gloss, low gloss, and metallic finishes.
E67 Series Polane P® Conductive Primer is a low bake, low VOC, two component urethane designed to provide superior adhesion to various rigid plastic substrates. The highly conductive film facilitates electrostatic application of topcoats for improved transfer efficiency.
GLAS CLAD® Black Conductive In-Mold Coating Primer
E67BR1906 is a low viscosity conductive in-mold coating designed to offer better coverage for molders when injecting into Sheet Molding Compound (SMC), Preform, or Bulk Molding Compound (BMC) while still in the mold. A long workable pot life permits the use of one component injection equipment. This technology leaves a conductive surface allowing electrostatic application of subsequent coating while filling mold imperfections and surface porosity.
GENESIS® Interior
The Genesis® Interior product line is an extremely durable 2K solventborne coating for interior trim. It is available in high gloss, low gloss, and metallic finishes.
Service and Support
- On-Site Technical Support
- Marketing Support
- Training
- Color Formulation and Documentation
- Standard Operating Procedures (SOPs)
- Lean Production Analysis