Back Close
  • Finish 1 Clearcoats Prod

    Finish 1™ Clearcoats

    Finish 1™ offers a variety of clearcoats formulated to provide excellent gloss and flow characteristics, while maintaining weathering and chemical resistance.

    • Value Priced
    • Available in National Rule and Low VOC
    • Fast dry times
    • High gloss
    • Easy to apply and polish
    • 4 to 1 mix ratio

    View Page 8 for Finish 1™ Clearcoats

    Clearcoat Selection Chart

    HIGH PERFORMANCE FACTORY PACKAGED ACRYLIC ENAMELS

     

    •         25 vibrant solids, metallics and pearls representetive of today's popular colors
    •         Great gloss and metallic control
    •         Easy 4:1 mixing ratio
    •         Easy to apply
    •         3.5 VOC compliant
    •         Great Value



    Description


    Finish 1 is a high performing 3.5 VOC Acrylic Enamel offering excellent gloss and metallic control. For optimum performance, use of the recommended sealer is suggested.

     

    Mixing


    4 Finish 1 3.5 Color + 1 Hardener

    Harden Temperature Range
    FH611: 60 F - 70 F (air dry only)
    FH612: 65 F - 85 F
    FH613: 80 F and above


    Application
     

    •         Apply 2 medium wet coats or until uniform color is achieved
    •         Allow each coat to flash until handslick
    •         Adjust air pressure to 10 psi HVLP
    •         Adjust air pressure to 40-45 psi conventional gravity feed



    Drying Schedule


    Air Dry:
    Out of Dust – 30 minutes @ 70° F
    To Deliver – Overnight

    Force Dry:
    30 minutes at 120° F surface temperature

    Buffing Times*:
    Air Dry – After 24 hours
    Force Dry – 30 minutes after cool down

    *Buffing of Metallic Colors may cause streaking. Only a light polishing of metallic colors is recommended.

    Finish 1™ Ultimate Spot/Panel Clearcoat

    Finish 1™ Ultimate Overall Clearcoat

    Finish 1™ 3.5 VOC HS Clearcoat

    Finish 1™ Super Brillante 2.1 VOC Clearcoat