Back Close
  • Finish 1 Primers Prod

    Finish 1™ Undercoats

    Finish 1™ offers a complete line of primers and primer sealers formulated for superior adhesion and corrosion resistance that can be applied over numerous substrates 

    • Value Priced
    • Available in National Rule and Low VOC
    • Simplified mix ratios
    • Gray Scale Sealers for various topcoat colors
    • Direct to Metal and Urethane High-build

    FP301 Finish 1™ Etching Primer

    Finish 1™ Etching Primer is ideal for spot and panel repairs where bare metal is present. It increases both adhesion and corrosion protection on bare substrate. It fills minor surface imperfections and may be topcoated directly for quick and easy repairs.

    FP401 &402 Finish 1™ Acrylic Primer Surfacer

    Finish 1™ Acrylic Primer Surfacer is a fast-drying, easy sanding primer that offers excellent adhesion, fast filling characteristics, outstanding feather-edging and good color holdout.

    FP410 Finish 1™ 2K Fast Filling High Build Primer

    Finish 1™ 2K Fast Filling High Build Primer is an excellent quality, two-component acrylic urethane primer-surfacer designed for high build and fast filling of repair areas. Provides maximum gloss holdout, eliminates sand scratch swelling and promotes excellent adhesion.

    FP415 Finish 1™ 2.1 2K Extreme Filling DTM High Build Primer

    Finish 1™ 2.1 2K Extreme Filling DTM High Build Primer is a 2.1 VOC compliant, two-component acrylic urethane primer-surfacer designed for high build and fast filling of repair areas. Provides maximum gloss holdout, eliminates sand scratch swelling and promotes excellent adhesion

    FS520, FS522, & FS524 2.1 VOC Sealers

    High quality 2.1 VOC urethane sealers are designed to provide excellent topcoat holdout for superior gloss and DOI. These sealers fill 400 or finer grit sand scratches, prevent sandscratch swelling and ensure adhesion to OEM substrates. These sealers can be used individually, or they can be mixed together to create any shade of gray to optimize coverage of the topcoat color.

    FS510, FS512, & FS514 Finish 1 Sealer

    Finish 1™ Sealers are fast-drying 4.6 VOC enamel sealers that are designed to create a solid foundation and uniform color. They have both one component and two component capabilities and can be recoated "wet-on-wet". These sealers can also be mixed together at any ratio to create a "Grayscale" offering.

    HIGH PERFORMANCE FACTORY PACKAGED ACRYLIC ENAMELS

    •         25 vibrant solids, metallics and pearls representetive of today's popular colors
    •         Great gloss and metallic control
    •         Easy 4:1 mixing ratio
    •         Easy to apply
    •         3.5 VOC compliant
    •         Great Value



    Description


    Finish 1 is a high performing 3.5 VOC Acrylic Enamel offering excellent gloss and metallic control. For optimum performance, use of the recommended sealer is suggested.

     

    Mixing


    4 Finish 1 3.5 Color + 1 Hardener

    Harden Temperature Range
    FH611: 60 F - 70 F (air dry only)
    FH612: 65 F - 85 F
    FH613: 80 F and above


    Application

    •         Apply 2 medium wet coats or until uniform color is achieved
    •         Allow each coat to flash until handslick
    •         Adjust air pressure to 10 psi HVLP
    •         Adjust air pressure to 40-45 psi conventional gravity feed



    Drying Schedule


    Air Dry:
    Out of Dust – 30 minutes @ 70° F
    To Deliver – Overnight

    Force Dry:
    30 minutes at 120° F surface temperature

    Buffing Times*:
    Air Dry – After 24 hours
    Force Dry – 30 minutes after cool down

    *Buffing of Metallic Colors may cause streaking. Only a light polishing of metallic colors is recommended.

    Finish 1™ Etch Primer

    Finish 1™ Acrylic Primer Surfacer, Gray

    Finish 1™ Acrylic Primer Surfacer, Red

    Finish 1™ 2K HS Primer, Gray

    Finish 1™ 2.1 VOC DTM Primer, Gray

    Finish 1™ 2.1 VOC High-Build Gray Urethane Primer Surfacer

    Finish 1™ Enamel Sealer, Black

    Finish 1™ Enamel Sealer, Gray

    Finish 1™ Enamel Sealer, White

    Finish 1™ 2.1 VOC Urethane Sealer, Black

    Finish 1™ 2.1 VOC Urethane Sealer, Gray

    Finish 1™ 2.1 VOC Urethane Sealer,