Back Close
  • Finish 1 Factory Pack Prod

    Finish 1™ Factory Packaged Single Stage Acrylic Enamel Colors

    Finish 1™ Acrylic Enamel is a high performing factory packaged color system offering bright vivid colors while displaying excellent gloss and metallic control.
     

    • 25 vibrant solids, metallics and pearls representative of today's popular colors.
    • Single stage acrylic enamel coating that does not require a clear top coat
    • Achieve 2.8 VOC when used with FH614, FH615 and FH616 hardeners.
    • Achieve 3.5 VOC when used with FH611, FH612 and FH613 hardeners
    • For optimum performance, use the recommended sealer color suggested for each color.
    • 4:1 mix ratio
    • Great gloss and metallic control
     Finish 1™ Factory Pack Application Guide Image

    Finish 1™ Factory Pack Application Guide Finish 1 Factory Packaged Application Guide includes a complete guide of all preparation, repair, care, and safety required for this application.

    Download Now

    HIGH PERFORMANCE FACTORY PACKAGED ACRYLIC ENAMELS

    •     25 vibrant solids, metallics and pearls representetive of today's popular colors
    •     Great gloss and metallic control
    •     Easy 4:1 mixing ratio
    •     Easy to apply
    •     3.5 VOC compliant
    •     Great Value


    Description


    Finish 1 is a high performing 3.5 VOC Acrylic Enamel offering excellent gloss and metallic control. For optimum performance, use of the recommended sealer is suggested.

     

    Mixing


    4 Finish 1 3.5 Color + 1 Hardener

    Harden Temperature Range
    FH611: 60 F - 70 F (air dry only)
    FH612: 65 F - 85 F
    FH613: 80 F and above


    Application

    •     Apply 2 medium wet coats or until uniform color is achieved
    •     Allow each coat to flash until handslick
    •     Adjust air pressure to 10 psi HVLP
    •     Adjust air pressure to 40-45 psi conventional gravity feed


    Drying Schedule


    Air Dry:
    Out of Dust – 30 minutes @ 70° F
    To Deliver – Overnight

    Force Dry:
    30 minutes at 120° F surface temperature

    Buffing Times*:
    Air Dry – After 24 hours
    Force Dry – 30 minutes after cool down

    *Buffing of Metallic Colors may cause streaking. Only a light polishing of metallic colors is recommended.

    Finish 1™ Acrylic Enamel Teal Metallic

    Finish 1™ Acrylic Enamel Hi-Light Blue Pearl

    Finish 1™ Acrylic Enamel Dark Blue Metallic

    Finish 1™ Acrylic Enamel Dark Green

    Finish 1™ Acrylic Enamel Charcoal Mist Metallic

    Finish 1™ Acrylic Enamel Gold Metallic

    Finish 1™ Acrylic Enamel Omaha Orange

    Finish 1™ Acrylic Enamel Wine Red Mica

    Finish 1™ Acrylic Enamel Blaze Red Crystal Pearl

    Finish 1™ Acrylic Enamel Wimbledon White

    Finish 1™ Acrylic Enamel Olympic White

    Finish 1™ Acrylic Enamel, Corvette Yellow

    Finish 1™ Acrylic Enamel Pure White

    Finish 1™ Acrylic Enamel Fleet White

    Finish 1™ Acrylic Enamel Light Blue Metallic

    Finish 1™ Acrylic Enamel Swift Red

    Finish 1™ Acrylic Enamel Imperial Orange Metallic

    Finish 1™ Acrylic Enamel Champagne Pearl Metallic

    Finish 1™ Acrylic Enamel Brilliant Black Pearl

    Finish 1™ Acrylic Enamel Galaxy Silver

    Finish 1™ Acrylic Enamel Coach Black

    Finish 1™ Acrylic Enamel Spectre Blue Metallic